Pete's
Super Raptor 60-90 w/"ThunderOS" 91 parts-1-2-3
Run time=19:35 min (53
meg wmv.zip file) (Note:
File now runs completely, works correctly)
Posted:
10/22/02 - Updated
11/19/02
Pete's
Super Raptor 60-90 w/"ThunderOS" 91 part -1-2
Run Time
=10.50 min (7.5 meg
wmv.zip)
file (first and second part of full vid)
Posted: 12/19/02
Pete's
Super Raptor 60-90 w/"ThunderOS" 91 part -1
Run Time
=3:45 min (3.5 meg
wmv.zip)
file (first part of full vid)
Posted: 12/19/02
Pilot: Pete Schmidt / Excellent
Video work shot by Mark Shueler
Basic
Specs =Thunder Tiger Raptor 60 base machine -90 upgrade with the following
modifications (note: not all mods listed.
-
Engine: OS 91 FX w/Thunder Tiger 90 Head w/ 61 SX-H carb, Hatori Fat
Boy pipe
-
Gearing:
93/11Second version
TT90 clutch w/PRCP liner @ .008" clearance
-
Large capacity TT Fuel
tank-raised 1"(24mm) for better fuel draw consistency
-
PRCP
Pro-Stunt header tank (No clunk) with side fill
-
680mm mains @ 11.5 pos-neg in idle 2,
14 deg pos/9neg in hold for autos
-
105mm NHP
tail blades
Vario Fly Bar Paddles
@17 grams ea.
-
Modified flybar-bell
mixer-washout
arms and swashplate ratios
-
Dual
Collective Servos=276 in oz torque from (2- 94258 138 in
oz-.10 spd Airtonics servos)
-
Futaba 9303 (100 in oz, ) on cyclics,
Airtronics 94257 .06 spd. servo on throttle
-
1900 mAh bat, Fut GY 601
gyro w/Fut 9251 servo,
-
Deep V- throttle curve
100/89/45/89/100 w/ 100%
throttle mix on cyclics. Note pos 2/4 thr vary from 85% to 100% depending on
the pitch in those positions (2/4)
-
PRCP
CF Frames, PRCP CF Pull-Pull Tail Mount Rudder +Posi-Loc Pushrod
Kit
-
|
Pete's
Super Raptor 60-90 w/"ThunderTiger" 90
Inverted
Auto Flip outs ("Sleek 1"
Canopy
an Tail Fairing)
Run time=5min (14
meg
wmv.zip file)
Posted:12/19/02
 

Basic
Specs =Thunder Tiger Raptor 60 base machine -90 upgrade with the following
modifications (note: not all mods listed.
-
Engine: Thunder Tiger 90 w/ stock carb,
Modified KSJ pipe (18 cu.in.)
-
Gearing:
92/11 First version
TT90 clutch w/Stock liner .020 clearance (stock)
-
Large capacity TT Fuel
tank-raised 1"(24mm) for better fuel draw consistency
-
PRCP
Pro-Stunt header tank (No clunk) with side fill
-
680mm mains @
10.5 pos-neg in idle 2, 12 deg pos/8 neg in hold for autos
-
105mm NHP
tail blades
Vario Fly Bar Paddles
@17 grams ea.
-
Modified flybar-bell
mixer arm ratios
-
Collective
1- 94257 100 in oz-.06 spd Airtonics servo)
-
Futaba 9303 (100 in oz, ) on cyclics, FMA
.10 spd. servo on throttle
-
1900 mAh bat, Fut GY
401
gyro w/Fut 9253 servo,
-
Deep V- throttle curve
100/95/45/95/100 w/ 100%
throttle mix on cyclics. Note pos 2/4 thr vary from 85% to 100% depending on
the pitch in those positions (2/4)
-
Stock Frames, PRCP CF Pull-Pull Tail Mount Rudder
+Posi-Loc Pushrod
Kit
-
"Sleek
1" Canopy and Tail Fairing
|
Pete's
Super Raptor 60-90 w/"ThunderTiger" 90
UH-OH!-
short-end ("Sleek 1" Canopy)
Run time=17 sec (3/4
meg
wmv.zip file)
Posted:12/19/02
Pete's
Super Raptor 60-90 w/"ThunderTiger" 90
UH-OH!-
Full ("Sleek 1" Canopy)
Run time=5:28 min (9
meg
wmv.zip file)
Posted:12/19/02
Pilot: Pete Schmidt / Excellent
Video work shot by Brent Young

Basic
Specs =Thunder Tiger Raptor 60 base machine -90 upgrade with the following
modifications (note: not all mods listed.
-
Engine: Thunder Tiger 90 w/ stock carb,
DNHP 90 pipe (15 cu.in.)
-
Gearing:
91/11 First version
TT90 clutch w/Stock liner .020 clearance (stock)
-
Large capacity TT Fuel
tank-raised 1"(24mm) for better fuel draw consistency
-
PRCP
Pro-Stunt header tank (No clunk) with side fill
-
680mm mains @
10.5 pos-neg in idle 2, 12 deg pos/8 neg in hold for autos
-
105mm NHP
tail blades
Vario Fly Bar Paddles
@17 grams ea.
-
Modified flybar-bell
mixer arm ratios
-
Collective
1- 94257 100 in oz-.06 spd Airtonics servo)
-
Futaba 9303 (100 in oz, ) on cyclics, FMA
.10 spd. servo on throttle
-
1900 mAh bat, Fut GY
401
gyro w/Fut 9253 servo,
-
Deep V- throttle curve
100/95/45/95/100 w/ 100%
throttle mix on cyclics. Note pos 2/4 thr vary from 85% to 100% depending on
the pitch in those positions (2/4)
-
Stock Frames, PRCP CF Pull-Pull Tail Mount Rudder
+Posi-Loc Pushrod
Kit
-
"Sleek
1" Canopy and Tail Fairing
|
F/A
Cyclic Link Mod Text F/A Cyclic
Link Mod Sketch
Linkage Mod Photo(s)
To "Pete's Pages"
To Pete's
Hobbies
|